Which version is quoted?
Ask for the model, version, air conditioning and lamp counts in writing. The quote checklist shows how to compare quotes on the same basis.
Two beds that both run on a 3 x 25 A supply but draw very different power. Here is what KBL’s folders say, and where the two differ.
The K9S draws up to 12.3 kW with air conditioning. The K11 Air draws 6.5 to 7.8 kW, depending on the air conditioning fitted, and the Select and Plus versions 8.25 to 9.55 kW. Both list a 3 x 25 A breaker with RCD. The K11 Air asks for a bigger room (2.7 x 2.6 m recommended against 2.5 x 2.2 m) and the Loft version needs 2.85 m of height. Neither folder gives a price.
We supply both beds, so weigh our commentary with that in mind. Every figure is from KBL’s own folders, which we read on 14 November 2026. KBL notes that it can change technical data without notice.
| K9S | K11 Air | K11 Air Select and Plus | |
|---|---|---|---|
| Maximum power | 12.3 kW with air conditioning, 11.0 kW without | 6.5 kW. 6.95 kW with AC, 7.8 kW with Comfort AC | 8.25 kW. 8.7 kW with AC, 9.55 kW with Comfort AC |
| Breaker | 3 x 25 A, K-type, with RCD | 3 x 25 A, K-type, with RCD. A single phase 230 V option is listed with a 35 A breaker | As K11 Air |
| Bed surface | 2,035 x 1,164 mm | 2,035 x 1,046 mm | 2,035 x 1,046 mm |
| Room in the folder | Recommended 2,500 x 2,200 mm | Minimum 2,500 x 2,400 mm. Recommended 2,700 x 2,600 mm | As K11 Air |
| Minimum room height | 2,400 mm | 2,435 mm. 2,850 mm with LOFT | As K11 Air |
| Weight | About 645 kg including air conditioning | Up to 785 kg. Up to 905 kg with LOFT | As K11 Air |
Sources: KBL K9S folder (PDF) and KBL K11 Air folder (PDF), read 14 November 2026. The K11 Air folder lists the Air, Select and Plus models, with Select and Plus sharing one set of power figures, and gives an average consumption of 7.25 kW for the Plus, based on KBL’s measurements in studios where about half of sessions use the sensor.
On the breaker the two are alike, because both list 3 x 25 A with an RCD. On power they are not. The K9S sits near the top of the single bed range at 12.3 kW with air conditioning, and the plain K11 Air asks for about half as much at 6.5 kW. That gap matters when a salon already runs several beds on one supply, since the total draw is what your electrician sums.
The K11 Air folder also lists a single phase 230 V connection with a 35 A breaker, which the K9S folder does not. Whether either connection is possible in your building is a question for your electrician. Our three-phase power and ventilation guide lists what to ask, and the salon planner adds up your own mix of beds.
The K9S is 2,300 mm long and 1,480 mm wide when closed, and 1,600 mm high. Its folder recommends a room of 2,500 x 2,200 mm and 2,400 mm of height, with 100 mm to the side walls and 0 mm to the back wall. The K11 Air folder gives a minimum of 2,500 x 2,400 mm and recommends 2,700 x 2,600 mm. For ceiling height it lists 2,435 mm, and 2,850 mm for the LOFT version. A room that suits a K9S can fall short for a K11 Air, so measure before you shortlist.
Weight is worth a word too. The K9S folder lists about 645 kg including air conditioning, and the K11 Air folder a maximum of 785 kg with the air conditioning unit and 905 kg for LOFT. Ask your installer whether the floor and the delivery route will take it, and use the delivery access checklist to plan the day.
The K11 Air comes in three models in KBL’s folder: K11 Air, K11 Air Select and K11 Air Plus, with the Select and Plus versions drawing more than the base bed. KBL says the K11 Air models use only high-performance LEDs across the tanning range, where the K9S folder lists lamp configurations.
The K9S folder shows three LightSelect configurations, vitaSun, hybridSun and extraSun, with different lamp mixes, so a K9S vitaSun and a K9S hybridSun are different tanning beds on the same chassis. Ask for the lamp counts of the configuration on your quote, and read our hybrid sunbed systems guide before you compare a hybridSun quote with another brand.
KBL describes the K9S facials as SunSphere Pro, listing 144 UVA LEDs, 21 UVB LEDs and 850 red Nano Beauty LEDs. The folder also lists AirBreeze ventilation, AquaCool mist, a 10 inch and a 7 inch SmartControl display, a 3D soundbar, Bluetooth and wireless charging for phones. Which of these come with the bed you are quoted is a question for the quote.
We have not seen a megaSun “K9SL” in the K9S folder or on megasun.de. If a seller uses that name, ask what exactly it is and for the manufacturer’s data sheet.
Deluxe Tanning Studio added a K11 seven months after opening, as told in its case study. The K9S is part of the line-up at Forever Sun and Empire Tanning Lounge. A case study is one business’s story and not a forecast for yours, and the payback calculator lets you test a bed against your own prices.
We do not publish a price for a named model, and neither KBL folder gives one. Finance starts from £220 + VAT per month, subject to status, equipment value and finance approval, as set out on the lease and finance page. The price of a particular bed depends on the model, the version, whether it is new or reconditioned and what is included, so ask for it in writing.
Ask for the model, version, air conditioning and lamp counts in writing. The quote checklist shows how to compare quotes on the same basis.
Ask what work was done on a reconditioned bed and what paperwork comes with it. See new vs reconditioned sunbeds.
Check whether the quote covers delivery, installation, commissioning and staff training. Our prices page explains what moves the price.
See the megaSun brand page for how we supply and service the brand, and the K7S guide for a smaller bed from the same family. The sunbeds page lists every brand we supply, including Ergoline Prestige and Luxura stand ups. If this is your first salon, start with how to start a tanning salon in the UK.
The K9S. KBL lists 12.3 kW with air conditioning for the K9S and 6.5 to 7.8 kW for the K11 Air. The K11 Air Select and Plus list 8.25 to 9.55 kW.
Both folders list a 400 V three-phase connection with a 3 x 25 A breaker and RCD. The K11 Air folder also lists a single phase 230 V connection with a 35 A breaker. Your electrician confirms what your building supports.
KBL’s folder gives a minimum of 2,500 x 2,400 mm and recommends 2,700 x 2,600 mm. The minimum room height is 2,435 mm, and 2,850 mm for the LOFT version.
We do not publish a price for a named model, and KBL’s folders give none. Finance starts from £220 + VAT per month, subject to status, equipment value and finance approval. Ask for a written quote for the exact unit.
We have not seen a K9SL in KBL’s K9S folder or on megasun.de. Ask the seller what the name refers to and ask for the manufacturer’s data sheet for that bed.
Finance is available across our range of new and reconditioned megaSun, Ergoline, Luxura and J Sunbeds beds, subject to status. See lease and finance.
This guide is a summary for business owners, not technical or legal advice. Figures come from KBL’s K9S and K11 Air folders, read on 14 November 2026, and KBL reserves the right to change them. megaSun is a trademark of its owner, and J Solutions is not the official UK distributor of any manufacturer.
Luxura, the Hapro range, makes the V6 and V8 as vertical beds, but neither is one fixed specification. Each brochure lists several versions with different tubes, power and current.
Two lay down beds from the same range that need almost the same supply and room. Here is what the manufacturer’s planning manuals say, and where the two differ.
KBL and megaSun are the same business under two names. Here is who is behind the brand, how the range is laid out, and what to ask whoever sells you one.
Free consultation with a supplier who installs, services and supports what it sells.
Book free consultationReal feedback from people who’ve bought beds, had installs and trained with Julita’s team.
“I had a pleasure to deal with j solution. Best in the business. Have few sunbeds bought and assembled by the company. Never had any issues with the equipment. They would also advise what’s new on the market. Thank you kindly”
“I’ve had a great experience working with J Solutions. They are extremely knowledgeable when it comes to sunbeds, lotions, and overall salon setup. From installation to training days, everything was handled professionally and efficiently. The team took the time to explain everything clearly, making sure I felt confident using the equipment and products. Highly recommend J Solutions to anyone looking for reliable support, quality products, and expert guidance within the tanning industry.”
“The salon looks absolutely stunning – it’s on a completely different level. Everything feels premium and high quality, especially the tanning beds. From a staff and client perspective, the investment was 100% worth it. I also received extremely detailed and professional training on tanning, skin types and safety. The support doesn’t stop after delivery. Highly recommended.”
Happy with your install or support?