Guide for salon owners · November 2026

megaSun K7S sunbed: power, room, hybridSun and what to ask

KBL calls its beds solariums. The K7S is the LED version of its 46 lamp K-Series tanning bed, and this is what the manufacturer’s own folder says about its power, supply and room.

Quick answer

The megaSun K7S draws up to 11.2 kW with air conditioning (10.0 kW without) from a 400 V three-phase supply protected by a 3 x 25 A breaker with RCD. KBL recommends a room of 2.5 x 2.2 m and at least 2.4 m high. The folder lists the same 46 lamps and four facial tanners as the K7, and the S models add LED technology to the facials. It gives no price, so ask for one in writing.

Maximum power
11.2 kW with air conditioning, 10.0 kW without
Supply
400 V three-phase, 3 x 25 A breaker with RCD
Recommended room
2,500 x 2,200 mm, 2,400 mm minimum height
Closed footprint
2,300 x 1,373 mm, 1,397 mm high

The K-Series family side by side

KBL publishes one technical table for four K-Series beds, so you can see where the K7S sits. The figures come from KBL’s K-Series folder, which we read on 14 November 2026. We supply megaSun beds, so weigh our commentary with that in mind.

K6K7K6SK7S
Maximum power with air conditioning12.6 kW13.3 kW10.5 kW11.2 kW
Maximum power without air conditioning11.4 kW12.1 kW9.3 kW10.0 kW
Lamps on the body42464246
Facial tanners4444

Source: KBL K-Series folder (PDF) and the K7S and K6S page on megasun.de, both read 14 November 2026. The folder lists lamp counts by chassis (K6 and K6S, K7 and K7S), so the lamp row follows that grouping.

What a K7S tanning bed needs from your salon

The folder gives one set of installation figures for the series. All four beds list a 400 V three-phase connection (3N, 50 Hz) and a K-type three-pole breaker rated 3 x 25 A with an RCD. The bed is 2,300 mm long and 1,373 mm wide when closed, and 1,397 mm high. Open, the lid lifts the overall height to 1,947 mm, or 2,096 mm with the exhaust fitted.

The room figures are a recommended size of 2,500 mm wide by 2,200 mm deep, a minimum room height of 2,400 mm, 100 mm to the side walls and 0 mm to the back wall. KBL also gives limits for the room itself: relative humidity up to 70% and a room temperature up to 30 °C, in a dry room with enough airing and ventilation. The folder lists a weight of about 705 kg including air conditioning, and a maximum load of 150 kg on the bed.

Those are manufacturer figures, not a survey of your building. Your electrician confirms the supply, and our three-phase power and ventilation guide lists what to ask. The salon planner does the sum for your own mix of beds.

How the K7S differs from the K7

The two beds share a chassis and the same 46 lamp and four facial layout in the folder. The difference KBL describes is LED technology. It says LEDs became part of the sunbed sector with the P9S and are now in the K6S and K7S, with aspherical lenses in front of the LEDs for an even spread of light across the face and décolleté.

For the facials, the folder lists 140 UVA LEDs and three UVB special lamps. The power table shows the effect on the supply: the K7S asks for 2.1 kW less than the K7 with air conditioning, and 2.1 kW less without it.

The folder does not say what the S stands for, so we will not guess. If a seller calls a bed a K7S, ask for the lamp and facial specification in writing so you know which of the two you are buying.

Options listed for the K-Series

KBL lists three LightSelect lamp configurations for the series, hybridSun, extraSun and smartSun, and two facial choices, pureFacials and SunSphere Facials. The standard and optional equipment pages list a 10 inch and a 7 inch SmartControl display, a 3D soundbar, Bluetooth, wireless charging, AirBreeze ventilation for face and body, air conditioning, AquaCool mist, aroma, VoiceAssist, an Infinity Mirror and a Light Art Panel.

Which of those are fitted differs from bed to bed, and the folder marks some as options. Hybrid has no standard definition across manufacturers, so our hybrid sunbed systems guide is worth a read before you compare a hybridSun quote with another brand’s hybrid.

megaSun K7S price and buying one in the UK

We supply new and professionally reconditioned megaSun beds, and we handle delivery, installation, commissioning and staff training. We have not written up a K7S installation, so we cannot point to a salon that runs one. Ask us what is available and for the exact specification of any unit we quote.

We do not publish a price for the K7S. Our prices page gives starting prices by type of bed, and finance starts from £220 + VAT per month, subject to status, equipment value and finance approval, as set out on the lease and finance page.

For the wider range, the sunbeds page lists every brand we supply, and the megaSun brand page covers how we supply and service this one. K9S and K11 compared covers two larger beds from the same family, and megaSun and KBL explained covers who makes the range and how to buy one.

Which lamp configuration?

Ask for the lamp counts and the LightSelect configuration written on the quote. The quote checklist shows how to compare quotes on the same basis.

Will your supply carry it?

The folder lists 3 x 25 A. Have an electrician confirm your supply and the rotary isolator before you order.

Will the room fit it?

Measure against 2,500 x 2,200 mm and 2,400 mm of height, and measure the stairs too. Our delivery access checklist covers the route.

FAQ

megaSun K7S questions

What is a megaSun K7S?

It is a lay down tanning bed in KBL’s K-Series. KBL’s folder groups it with the K7 on one chassis with 46 lamps and four facial tanners, and says the K7S adds LED technology to the facials.

How much power does a K7S use?

KBL lists a maximum of 11.2 kW with air conditioning and 10.0 kW without, on a 400 V three-phase supply with a 3 x 25 A breaker and RCD. Confirm the figure for the exact bed you are quoted.

What size room does a K7S need?

KBL recommends 2,500 mm wide by 2,200 mm deep, at least 2,400 mm high, with 100 mm to the side walls. Your electrician and installer check the real room.

How much does a megaSun K7S cost?

We do not publish a price for a named model, and KBL’s folder gives none. Our prices page shows starting prices by type of bed, and finance starts from £220 + VAT per month, subject to status. Ask for a written quote for the exact unit.

Is the K7S a hybrid sunbed?

KBL lists hybridSun as one of three LightSelect configurations for the K-Series. Hybrid is a manufacturer’s label with no standard definition, so ask for the lamp counts of the configuration on your quote.

Has the megaSun K7S been discontinued?

KBL still listed the K7S and K6S on megasun.de on 14 November 2026. What a UK supplier can source changes over time, so ask us what is available.

Can I lease a K7S?

Finance is available across our range of new and reconditioned megaSun, Ergoline, Luxura and J Sunbeds beds, subject to status. Ask us whether the K7S is available. See lease and finance.

This guide is a summary for business owners, not technical or legal advice. Figures come from KBL’s K-Series folder and megasun.de, read on 14 November 2026, and KBL reserves the right to change them. megaSun is a trademark of its owner, and J Solutions is not the official UK distributor of any manufacturer.

Talk it through

Tell us about your salon, your room and your budget

Free consultation with a supplier who installs, services and supports what it sells.

Book free consultation
Client feedback

What salon owners say

Real feedback from people who’ve bought beds, had installs and trained with Julita’s team.

“I had a pleasure to deal with j solution. Best in the business. Have few sunbeds bought and assembled by the company. Never had any issues with the equipment. They would also advise what’s new on the market. Thank you kindly”

Agnieszka Agi Sobera Jul 2026 · Trustpilot

“I’ve had a great experience working with J Solutions. They are extremely knowledgeable when it comes to sunbeds, lotions, and overall salon setup. From installation to training days, everything was handled professionally and efficiently. The team took the time to explain everything clearly, making sure I felt confident using the equipment and products. Highly recommend J Solutions to anyone looking for reliable support, quality products, and expert guidance within the tanning industry.”

Tan Junkie Mar 2026 · Trustpilot

“The salon looks absolutely stunning – it’s on a completely different level. Everything feels premium and high quality, especially the tanning beds. From a staff and client perspective, the investment was 100% worth it. I also received extremely detailed and professional training on tanning, skin types and safety. The support doesn’t stop after delivery. Highly recommended.”

Gabriela Ghaleb Feb 2026 · Trustpilot

Happy with your install or support?